70-513 ist eine der Microsoft Zertifizierungsprüfungen. IT-Leute mit Microsoft Zertifikat sind sehr beliebt in der IT-Branche. Deshalb beteiligen sich imme mehr Leute an der 70-513 Zertifizierungsprüfung. Jedoch ist es nicht so einfach, die Microsoft 70-513 Zertifizierungsprüfung zu bestehen. Wenn Sie nicht an den entprechenden Kursen teilnehmen, brauchen Sie viel Zeit und Energie, sich auf die Prüfung vorzubereiten. Nun kann Pass4Test Ihnen viel Zeit und Energie ersparen.
Wenn Sie die Microsoft 70-513 Zertifizierungsprüfung bestehen wollen, ist es doch kostengünstig, die Produkte von Pass4Test zu kaufen. Denn die kleine Investition wird große Gewinne erzielen. Mit den Prüfungsfragen und Antworten zur Microsoft 70-513 Zertifizierungsprüfung können Sie die Prüfung sicher bestehen. Pass4Test ist eine Website, die einen guten Ruf hat und den IT-Fachleuten die Prüfungsfragen und Antworten zur Microsoft 70-513 Zertifizierungsprüfung bieten.
Exam Code: 70-513
Prüfungsname: TS: Windows Communication Foundation velopment with Microsoft .NET Framework 4
Aktulisiert: 2014-01-20
Nummer: 163 Q&As
Es ist eine weise Wahl, sich an der Microsoft 70-513 Zertifizierungsprüfung zu beteiligen. Mit dem Microsoft 70-513 Zertifikat werden Ihr Gehalt, Ihre Stelle und auch Ihre Lebensverhältnisse verbessert werden. Es ust doch nicht so einfach, die Microsoft 70-513 Zertifizierungsprüfung zu bestehen. Sie brauchen viel Zeit und Energie, um Ihre Fachkenntnisse zu konsolidieren. Pass4Test ist eine spezielle Schulungswebsite, die Schulungsprogramme zur Microsoft 70-513 Zertifizierungsprüfung bearbeiten. Sie können zuerst Teil der Fragen und Antworten zur Microsoft 70-513 Zertifizierungsprüfung im Internet als Probe kostenlos herunterladen, so dass Sie die Glaubwürdigkeit unserer Produkte testen können. Normalerweise werden Sie nach dem Probieren unserer Produkte Vertrauen in unsere Produkte haben.
Wenn Sie sich noch anstrengend um die 70-513 Zertifizierungsprüfung bemühen, dann kann Pass4Test in diesem Moment Ihnen helfen, Problem zu lösen. Pass4Test bietet Ihnen Schulungsunterlagen mit guter Qualität, damit Sie die Prüfung bestehen und exzellentes Mitglied der Microsoft 70-513 Zertifizierung werden können. Wenn Sie sich entscheiden, durch die Microsoft 70-513 Zertifizierungsprüfung sich zu verbessern, dann wählen doch Pass4Test. Pass4Test zu wählen ist keinesfalls nicht falsch. UnserPass4Test verspricht, dass Sie zum ersten Mal die Microsoft 70-513 Zertifizierungsprüfung bestehen und somit das Zertifikat bekommen können. So können Sie sich sicher verbessern.
Sie brauch nicht so viel Geld und Zeit, nur ungefähr 30 Stunden spezielle Ausbildung, dann können Sie ganz einfach die Microsoft 70-513 Zertifizierungsprüfung nur einmal bestehen. Pass4Test bietet Ihnen die Prüfungsthemen, deren Ähnlichkeit mit den realen Prüfungsübungen sehr groß ist.
70-513 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/70-513.html
NO.1 The following is an example of a SOAP envelope.
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope">
<s:Header>
<h:StoreId xmlns:h="http://www.contoso.com">6495</h:StoreId>
</s:Header>
<s:Body>
<CheckStockRequest xmlns="http://www.contoso.com">
<ItemId>2469<ItemId>
</CheckStockRequest>
</s: Body>
</s:Envelope>
You need to create a message contract that generates the SOAP envelope.
Which code segment should you use?
A.[MessageContract(WrapperName="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember(Namespace="http://www.contoso.com")]
public int ItemId { get; set; }
}
B.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember(Namespace="http://www contoso.com")]
public int ItemId { get; set; }
}
C.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
public int ItemId { get; set; }
}
D.[MessageContract(WrapperNamespace="http://www.contoso.com")]
public class CheckStockRequest
{
[MessageHeader(Namespace="http://www.contoso.com")]
public int StoreId { get; set; }
[MessageBodyMember]
public int ItemId { get; set; }
}
Answer: D
Microsoft 70-513 prüfungsunterlagen 70-513 70-513 exam fragen 70-513
NO.2 You are developing a data contract for a Windows Communication Foundation (WCF) service.
The data in the data contract must participate in round trips. Strict schema validity is not required.
You need to ensure that the contract is forward-compatible and allows new data members to be added to
it.
Which interface should you implement in the data contract class?
A.ICommunicationObject
B.IExtension<T>
C.IExtensibleObject<T>
D.IExtensibleDataObject
Answer: D
Microsoft 70-513 70-513 70-513 zertifizierungsfragen 70-513 prüfungsfragen
NO.3 new NetTcpBinding(),
NO.4 new EndpointAddress("net.tcp://localhost:8080/Logger")
NO.5 A Windows Communication Foundation (WCF) client configuration file contains the following XML
segment in the system.serviceModel element.
<client>
<endpoint address="net.tcp://server/ContosoService"
binding="netTcpBinding"
contract="Contoso.IContosoService"
name="netTcp"/>
<endpoint address="net.pipe://localhost/ContosoService"
binding="netNamedPipeBinding"
contract="Contoso.IContosoService"
name="netPipe" />
</client>
You need to create a channel factory that can send messages to the endpoint listening at
net.pipe://localhost/ContosoService.
Which code segment should you use?
A.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("Contoso.IContoso");
B.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("netNamedPipeBinding");
C.ChannelFactory<Contoso.IContoso> factory = new ChannelFactory<Contoso.IContoso>("netPipe");
D.ChannelFactory<Contoso.IContoso> factory = new
ChannelFactory<Contoso.IContoso>("net.pipe//localhost/ContosoService");
Answer: C
Microsoft 70-513 70-513 zertifizierungsantworten 70-513
NO.6 A class named TestService implements the following interface:
[ServiceContract]
public interface ITestService
{
[OperationContract]
DateTime GetServiceTime();
}
TestService is hosted in an ASP.NET application.
You need to modify the application to allow the GetServiceTime method to return the data formatted as
JSON.
It must do this only when the request URL ends in /ServiceTime. What should you do?
A.Add this attribute to the GetServiceTime method.
[WebInvoke(Method="POST")]
In the web.config file, add this element to system.serviceModel/behaviors/endpointBehaviors.
<behavior name="Json">
<enableWebScript />
</behavior>
In the web.config file, configure TestService in the system.serviceModel/services collection as follows:
<service name="TestService">
<endpoint address="/ServiceTime"
contract="TestService"
behaviorConfiguration="Json"
binding="webHttpBinding" />
</service>
B.Add this attribute to the GetServiceTime method.
[WebInvoke(Method="GET", UriTemplate="/ServiceTime", ResponseFormat=WebMessageFormat.Json)]
In the web.config file, configure TestService in the system.serviceModel/services collection as follows:
<service name="TestService">
<endpoint address="/ServiceTime"
contract="TestService"
binding="webHttpBinding"/>
</service>
C.Add this attribute to the GetServiceTime method
[WebGet(ResponseFormat=WebMessageFormat.Json, UriTemplate="/ServiceTime")]
Create a new svc file named Jsonversion.svc with the following content.
<% @ServiceHost Service="TestService"
Factory="System.ServiceModel.ActivationWebServiceHostFactory" %>
D.Add this attribute to the GetServiceTime method.
[WebGet(UriTemplate="Json)/ServiceTime")]
Create a new .svc file named Jsonversion.svc with the following content
<% @ServiceHost Service="TestService"
Factory="System.ServiceModel.ActivationWebServiceHostFactory" %>
Answer: C
Microsoft 70-513 zertifizierung 70-513 zertifizierungsantworten 70-513 echte fragen 70-513
NO.7 RoutingConfiguration rc = new RoutingConfiguration();
NO.8 You are creating a Windows Communication Foundation (WCF) service that implements operations in a
RESTful manner.
You need to add a delete operation. You implement the delete method as follows:
void DeleteItems(string id);
You need to configure WCF to call this method when the client calls the service with the HTTP DELETE
operation. What should you do?
A.Add the WebInvoke(UriTemplate="/Items/{id}", Method="DELETE") attribute to the operation
B.Add the HttpDelete atribute to the operation
C.Replace the string parameter with a RemovedActivityAction parameter
D.Replace the return type with RemovedActivityAction.
Answer: A
Microsoft prüfungsfragen 70-513 zertifizierungsfragen 70-513 exam fragen 70-513
NO.9 rc.FilterTable.Add(new MatchAllMessageFilter(), lep);
NO.10 )
NO.11 You are creating a Windows Communication Foundation (WCF) service. You have the following
requirements:
Messages must be sent over TCP
The service must support transactions.
Messages must be encoded using a binary encoding
Messages must be secured using Windows stream-based security.
You need to implement a custom binding for the service. In which order should the binding stack be
configured?
A.tcpTransport, windowsStreamSecurity, transactionFlow, binaryMessageEncoding
B.transactionFlow, binaryMessageEncoding, windowsStreamSecurity, tcpTransport
C.windowsStreamSecurity, tcpTransport, binaryMessageEncoding, transactionFlow
D.binaryMessageEncoding, transactionFlow, tcpTransport, windowsStreamSecurity
Answer: B
Microsoft exam fragen 70-513 exam fragen 70-513 zertifizierungsfragen 70-513 exam fragen
NO.12 A Windows Communication Foundation (WCF) service implements a contract with one-way and
request-reply operations.
The service is exposed over a TCP transport. Clients use a router to communicate with the service.
The router is implemented as follows. (Line numbers are included for reference only.)
01 ServiceHost host = new ServiceHost(typeof(RoutingService));
02 host.AddServiceEndpoint(
03 typeof(ISimplexDatagramRouter),
04 new NetTcpBinding(), "net.tcp://localhost/Router"
05 );
06 List<ServiceEndpoint> lep = new List<ServiceEndpoint>();
07 lep.Add(
08 new ServiceEndpoint(
09 ContractDescription.GetContract(
10 typeof(ISimplexDatagramRouter)
11 ),
NO.13 You are developing a client that sends several types of SOAP messages to a Windows Communication
Foundation (WCF)
service method named PostData. PostData is currently defined as follows:
[OperationContract]
void PostData(Order data);
You need to modify PostData so that it can receive any SOAP message. Which code segment should
you use?
A.[OperationContract(IsOneWay=true, Action="*", ReplyAction="*")]
void PostData(Order data);
B.[OperationContract(IsOneWay=true, Action="*", ReplyAction = "*")]
void PostData(BodyWriter data);
C.[OperationContract]
void PostData(BodyWriter data);
D.[OperationContract]
void PostData(Message data);
Answer: D
Microsoft zertifizierungsfragen 70-513 prüfungsfragen 70-513 prüfungsfragen 70-513 echte fragen 70-513 70-513 prüfung
NO.14 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(IncludeExceptionDetailsInFaults = true)]
03 public class OrderService
04 {
05 [OperationContract]
06 public void SubmitOrder(Order anOrder)
07 {
08 try
09 {
10 ...
11 }
12 catch(DivideByZeroException ex)
13 {
14 ...
15 }
16 }
17 }
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A.Replace line 14 with the following line:
throw;
B.Replace line 14 with the following line:
throw new FaultException<Order>(anOrder, ex.ToString());
C.After line 05, add the following line:
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line:
throw ex;
D.Alter line 05, add the following line:
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line:
throw new FaultException<Order>(anOrder, "Divide by zero exception");
Answer: D
Microsoft 70-513 70-513 70-513 dumps
NO.15 host.Description.Behaviors.Add(new RoutingBehavior(rc));
Request-reply operations are failing. You need to ensure that the router can handle one-way and
request-reply operations.
What should you do?
A.Change line 03 as follows:
typeof(IRequestReplyRouter),
B.Change line 03 as follows:
typeof(IDuplexSessionRouter),
C.Change line 10 as follows:
typeof(IRequestReplyRouter)
D.Change line 10 as follows:
typeof(IDuplexSessionRouter)
Answer: B
Microsoft 70-513 dumps 70-513 testantworten 70-513 70-513
12.You are modifying an existing Windows Communication Foundation (WCF) service that is defined as
follows:
[ServiceContract]
public interface IMessageProcessor
{
[OperationContract]
void ProcessMessages();
}
public class MessageProcessor: IMessageProcessor
{
public void ProcessMessage();
SubmitOrder();
}
SubmitOrder makes a call to another service. The ProcessMessage method does not perform as
expected under a heavy load.
You need to enable processing of multiple messages. New messages must only be processed when the
ProcessMessage method is not processing requests,
or when it is waiting for calls to SubmitOrder to return.
Which attribute should you apply to the MessageProcessor class?
A.CallbackBehavior(ConcurrencyMode=ConcurencyMode.Reentrant)
B.CallbackBehavior(ConcurrencyMode=ConcurrencyMode.Multiple)
C.ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Reentrant)
D.ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Multiple)
Answer: C
Microsoft zertifizierungsantworten 70-513 70-513 prüfungsfragen 70-513 testantworten 70-513 70-513
13.A Windows Communication Foundation (WCF) service listens for messages at
net.tcp://www.contoso.com/MyService.
It has a logical address at http://www.contoso.com/MyService. The configuration for the WCF client is as
follows:
<endpoint address="http://www.contoso.com/MyService"
binding="netTcpBinding"
bindingConfiguraton="NetTcpBinding_IMyService"
contract="ServiceReference1.IMyService"
name="NetTcpBinding_IMyService"/>
The generated configuration does not provide enough information for the client to communicate with the
server.
You need to update the client so that it can communicate with the server. What should you do?
A.In the client configuration, change the value of the address attribute to
net.tcp://www.contoso.com/MyService
B.In the client configuration, change the value of the address attribute to
net.tcp://www.contoso.com/MyService listen=http://www.contoso.com/MyService.
C.After instantiating the client and before invoking any service operation, add this line of code.
EndpointBehaviors.Add(new EndpointDiscoveryBehavior(){ Enabled = true });
D.After instantiating the client and before invoking any service operation, add this line of code.
client.Endpoint.Behaviors.Add(new ClientViaBehavior(new
Uri("net.tcp://www.contoso.com/IMyService")));
Answer: D
Microsoft 70-513 prüfung 70-513 prüfungsfrage 70-513 70-513 antworten
14.A Windows Communication Foundation (WCF) service is self-hosted in a console application.
The service implements the IDataAccess contract, which is defined in the MyApplication namespace.
The service is implemented in a class named DataAccessService which implements the IDataAccess
interface and also is defined in the MyApplication namespace. The hosting code is as follows.
(Line numbers are included for reference only.)
01 static void Main(string[] args)
02 {
03 ServiceHost host;
04 ...
05 host.Open();
06 Console.ReadLine();
07 host.Close();
08 }
You need to create a ServiceHost instance and assign it to the host variable. You also need to instantiate
the service host.
Which line of code should you insert at line 04?
A.host = new ServiceHost("MyApplication.DataAccessService");
B.host = new ServiceHost("MyApplication.DataAccess");
C.host = new ServiceHost(typeof(IDataAccess));
D.host = new ServiceHost(typeof(DataAccessService));
Answer: D
Microsoft 70-513 prüfungsfrage 70-513
15.A Windows Communication Foundation (WCF) service implements the following contract.
[ServiceContract]
public interface IHelloService
{
[OperationContract(WebGet(UriTemplate="hello?name={name}"))]
string SayHello(string name);
}
The implementation is as follows:
public class HelloService: IHelloService
{
public string SayHello(string name)
{
return "Hello " + name;
}
}
The service is self-hosted, and the hosting code is as follows:
WebServiceHost svcHost = CreateHost();
svcHost.Open();
Console.ReadLine();
svcHost.Close();
You need to implement CreateHost so that the service has a single endpoint hosted at
http://localhost:8000/HelloService.
Which code segment should you use?
A.WebServiceHost svcHost = new WebServiceHost(typeof(HelloService));
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"http://localhost:8000/HelloService");
return svcHost;
B.Uri baseAddress = new Uri("http://localhost:8000");
WebServiceHost svcHost = new WebServiceHost(typeof(HelloService), baseAddress);
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"HelloService");
return svcHost;
C.WebServiceHost svcHost = new WebServiceHost(new HelloService());
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"http://localhost:8000/HelloService");
retumn svcHost
D.Uri baseAddress = new Uri("http://localhost:8000/");
WebServiceHost svcHost = new WebServiceHost(new HelloService(), baseAddress);
svcHost.AddServiceEndpoint(typeof(IHelloService),
new WebHttpBinding(WebHttpSecurityMode.None),
"HelloService");
retumn svcHost;
Answer: B
Microsoft prüfungsfrage 70-513 70-513 70-513 dumps 70-513 testantworten 70-513 originale fragen
16.You are building a client for a Windows Communication Foundation (WCF) service.
You need to create a proxy to consume this service. Which class should you use?
A.ChannelFactory<TChannel>
B.ServiceHost
C.ClientRuntime
D.CommunicationObject
Answer: A
Microsoft prüfung 70-513 prüfungsfragen 70-513 70-513
17.You are working with a Windows Communication Foundation (WCF) client application that has a
generated proxy named SampleServiceProxy.
When the client application is executing, in line 04 of the following code, the channel faults (Line numbers
are included for reference only.)
01 SampleServiceProxy proxy = new SampleServiceProxy();
02 try
03 {
04 proxy.ProcessInvoice(invoice);
05 }
06 catch
07 {
08 if(proxy.State == CommunicationState.Faulted)
09 {
10 ...
11 }
12 }
13 proxy.UpdateCustomer(customer);
You need to return proxy to a state in which it can successfully execute the call in line 13.
Which code segment should you use at line 10?
A.proxy.Close();
B.proxy = new SampleServiceProxy();
C.proxy.Abort();
D.proxy.Open();
Answer: B
Microsoft prüfungsfragen 70-513 70-513 zertifizierung 70-513
18.A Windows Communication Foundation (WCF) service has a callback contract. You are developing a
client application that will call this service.
You must ensure that the client application can interact with the WCF service. What should you do?
A.On the OperationContractAttribute, set the AsyncPattern property value to true.
B.On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the
client.
C.On the client, create a proxy derived from DuplexClientBase<TChannel>.
D.On the client, use GetCallbackChannel<T>.
Answer: C
Microsoft originale fragen 70-513 prüfungsfragen 70-513 70-513 dumps
NO.16 A Windows Communication Foundation (WCF) application uses the following data contract
[DataContract]
public class Person
{
[DataMember]
public string firstName;
[DataMember]
public string lastName;
[DataMember]
public int age;
[DataMember]
public int ID;
}
You need to ensure that the following XML segment is generated when the data contract is serialized.
<Person>
<firstName xsi:nil="true"/>
<lastName xsi:nil="true"/>
<ID>999999999<ID>
</Person>
Which code segment should you use?
A.[DataMember]
public string firstName;
[DataMember]
public string lastName;
[DataMember(EmitDefaultValue = true)]
public int age = 0;
[DataMember(EmitDefaultvValue = true)]
public int ID = 999999999;
B.[DataMember(EmitDefaultValue = false)]
public string firstName = null;
[DataMember(EmitDefaultValue = false)]
public string lastName = null;
[DataMember(EmitDefaultValue = true)]
public int age = -1;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
C.[DataMember(EmitDefaultValue = true)]
public string firstName;
[DataMember(EmitDefaultValue = true)]
public string lastName;
[DataMember(EmitDefaultValue = false)]
public int age = -1;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
D.[DataMember]
public string firstName = null;
[DataMember]
public string lastName = null;
[DataMember(EmitDefaultValue = false)]
public int age = 0;
[DataMember(EmitDefaultValue = false)]
public int ID = 999999999;
Answer: D
Microsoft dumps 70-513 zertifizierungsfragen 70-513
NO.17 A Windows Communication Foundation (WCF) service uses the following service contract.
[ServiceContract]
public interface IService
{
[OperationContract]
string Operation1(string s);
}
You need to ensure that the operation contract Operation1 responds to HTTP POST requests.
Which code segment should you use?
A.[OperationContract]
[WebInvoke(Method="POST")]
string Operation1(string s);
B.[OperationContract]
[WebGet(UriTemplate="POST")]
string Operation1(string s);
C.[OperationContract(ReplyAction="POST")]
string Operation1(string s);
D.[OperationContract(Action="POST")]
string Operation1(string s);
Answer: A
Microsoft 70-513 70-513 echte fragen 70-513 zertifizierungsantworten
NO.18 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A.Add the KnownType attribute to the data contract.
Set a default value in each of the data member declarations.
B.Add the KnownType attribute to the data contract.
Set the Order property of each data member to unique integer value.
C.Set the EmitDefaultValue property of each data member to false.
D.Set the lsRequired property of each data member to true.
Answer: D
Microsoft zertifizierungsfragen 70-513 70-513 70-513 70-513
NO.19 );
NO.20 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer.
You need to expose the following class as a service named Arithmetic with an operation named Sum:
public class Calculator
{
public int Add(int x, int y)
{
}
}
Which code segment should you use?
A.[ServiceContract(Namespace="Arithmetic")]
public class Calculator
{
[Operation Contract(Action="Sum")]
public int Add(int x, int y)
{}
}
B.[ServiceContract(ConfigurationName="Arithmetic")]
public class Calculator
{
[Operation Contract(Action="Sum")]
public int Add(int x, int y)
{}
}
C.[ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(Name="Sum")]
public int Add(int x, int y)
{}
}
D.[ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(ReplyAction="Sum")]
public int Add(int x, int y)
{}
}
Answer: C
Microsoft 70-513 prüfungsfragen 70-513
Pass4Test bietet Ihnen die neusten 200-101 exam Unterlagen und 74-325 pdf Fragen & Antworten mit hoher Qualität. Unser 70-341 zertifizierung und 000-656 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 700-501 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/70-513.html
没有评论:
发表评论