Die HP Zertifizierungen sind heute immer mehr populär, weil diese international anerkannt sind. Deshalb nehmen immer mehr Leute HP an Zertifizierungsprüfungen teil. Darunter ist die HP HP0-144 Prüfung eine der wichtigsten Prüfungen. Und, Wie können Sie sich auf die Prüfung vorbereiten? Lernen alle Kenntnisse sehr fleißig auswendig? Oder Benutze die hocheffektiven Lernmaterialien?
Wenn Sie sich um die HP HP0-144 Zertifizierungsprüfung bemühen, kann Pass4Test Ihnen helfen, Ihren Traum zu erfüllen. Die Übungen zur HP HP0-144 Zertifizierungsprüfung werden von der Praxis prüft. Die Schulungsunterlagen zur HP HP0-144 Zertifizierungsprüfung sind von guter Qualität, die Ihnen helfen, die HP HP0-144 Zertifizierungsprüfung zu bestehen und ein IT-Expert zu werden.
Um immer die besten IT-Zertifizierung dumps für Sie bieten, verbessern wir Pass4Test immer die Qualität der dumps und aktualisieren dumps nach den neuesten Prüfungsvorschriften. Pass4Test ist Ihre beste Wahl in heutigem Markt. Wenn Sie nicht glauben, können Sie nach anderen erkündigen. Es gibt unbedingt jemanden, der unsere Pass4Test Prüfungsunterlagen früher benutzt hat. Wir versprechen Ihnen die beste Nachschläge, einmal die Prüfung zu bestehen.
100% Garantie ProCurve Secure WAN Prüfungserfolg. Wenn Sie Pass4Test HP0-144 Prüfung wählen HP Pass4Test Test Engine ist das perfekte Werkzeug, um auf die Zertifizierungsprüfung vorbereiten. Erfolg kommt einfach, wenn Sie bereiten mit Hilfe von Original bis zu ProCurve Secure WAN Produkte mit Pass4Test Datum. Wie ein seltener Fall, wenn Sie es versäumen, diese Prüfung geben wir Ihnen eine volle Rückerstattung Ihres Einkaufs passieren.
Die Zertifizierungsantworten von Pass4Test haben von IT-Eliten mehr als 10 Jahre Erfahrungen durch Forschung und Praxis gesammelt. Pass4Test hat viele neueste und genaueste Prüfungsunterlagen. Pass4Test ist für Ihren Erfolg vorhanden. Es bedeutet, dass Sie Erfolg wählen, wenn Sie Pass4Test wählen. Wenn Sie IT-Prüfungen leicht bestehen, ist Pass4Test die einzige Wahl für Sie.
Exam Code: HP0-144
Prüfungsname: ProCurve Secure WAN
Aktulisiert: 2014-03-22
Nummer: 111 Q&As
Die Trainingsinstrumente von Pass4Test enthalten die Lernmaterialien und Simulationsfragen zur HP HP0-144 Zertifizierungsprüfung. Noch wichtiger bieten wir die originalen Fragen und Antworten.
HP0-144 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/HP0-144.html
NO.1 Which steps must you complete to enable access to the ProCurve Secure Router's web interface?
Select TWO.
A. Enable the ftp server.
B. Enable the http server.
C. Configure a Telnet password.
D. Configure an enable mode password.
E. Configure a username and password.
F. Configure an ACL permitting FTP traffic.
Answer: BE
HP antworten HP0-144 prüfungsfragen HP0-144 HP0-144 echte fragen HP0-144 zertifizierung
NO.2 Which Quality of Service (QoS) features does the ProCurve Secure Router support? Select TWO.
A. custom queuing
B. low latency queuing (LLQ)
C. weighted fair queuing (WFQ)
D. generic traffic shaping (GTS)
E. Frame Relay traffic shaping (FRTS)
Answer: BC
HP HP0-144 HP0-144 HP0-144 HP0-144 echte fragen
NO.3 Which type of connection may be used for the backup modules on the ProCurve Secure Router?
A. Asymmetric Digital Subscriber Line (ADSL)2+, Annex A or Annex B
B. T1 or E1 connections
C. Integrated Services Digital Network (ISDN) connection
D. Asynchronous Transfer Mode (ATM) connection
Answer: C
HP exam fragen HP0-144 prüfungsfrage HP0-144 HP0-144 zertifizierungsantworten
NO.4 What must you do to configure Point-to-Point Protocol over Ethernet (PPPoE) for an Asymmetric
Digital Subscriber Line (ADSL)?
A. Configure and bind the ATM interface to the ADSL interface; then bind the ATM subinterface to a PPP
interface.
B. Configure a PPP interface; then bind the PPP interface to the ADSL interface.
C. Configure both an ATM interface and a PPP interface, and bind the ADSL interface to both virtual
interfaces.
D. Configure a PPPoE interface and bind it directly to the ADSL interface.
Answer: A
HP HP0-144 HP0-144 HP0-144
NO.5 When you are configuring an Asymmetric Digital Subscriber Line (ADSL), what is the purpose of
training mode?
A. ADSL is dependent upon line quality; ADSL devices must determine the best way to use the line.
B. ADSL devices always negotiate the signaling standard used, based on the type of DSLAM used by the
public carrier.
C. The ADSL device and the DSLAM must identify the fastest switched virtual circuit (SVC) available.
D. The training mode is essentially a testing phase to determine if the ADSL module itself is working
correctly.
Answer: A
HP exam fragen HP0-144 HP0-144 prüfungsfragen HP0-144 HP0-144 echte fragen HP0-144 exam fragen
NO.6 Which tasks can you use CompactFlash to complete? Select TWO.
A. Configure routers at remote sites.
B. Increase RAM on the router by configuring virtual memory.
C. Enter bootstrap mode.
D. Back up configuration files.
E. Enable IPSec security.
F. Store and view the Secure Router OS in an uncompressed format.
Answer: AD
HP testantworten HP0-144 zertifizierungsfragen HP0-144 prüfungsunterlagen HP0-144
NO.7 Click the Exhibit button.
You want your ProCurve Secure Router to act as a gateway device for any remote VPN client who
initiates IKE in its most secure mode. Which policy shown contains the correct configurations for this
use?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
Answer: C
HP zertifizierungsfragen HP0-144 HP0-144 dumps
NO.8 The Asymmetric Digital Subscriber Line (ADSL) keeps going into training mode. What is causing this
problem?
A. The signaling type configured for the router does not match the signaling type used by the service
provider.
B. The encapsulation type configured for the router does not match the type used by the service provider.
C. The signal-to-noise (SNR) margin configured for the router is too high.
D. The ADSL interface has not been assigned an IP address.
Answer: C
HP prüfungsfragen HP0-144 HP0-144 zertifizierungsfragen HP0-144 HP0-144
NO.9 Which function does the virtual path identifier/virtual channel identifier (VPI/VCI) perform?
A. It identifies the endpoint for an Asynchronous Transfer Mode (ATM) connection.
B. It identifies the tunnel endpoint for virtual private network (VPN) peers.
C. It identifies the permanent virtual circuit (PVC) in a Frame Relay network.
D. It defines each peer in a Point-to-Point Protocol (PPP) connection, if authentication is configured.
Answer: A
HP echte fragen HP0-144 zertifizierungsantworten HP0-144 HP0-144 zertifizierung
NO.10 How can you configure the ProCurve Secure Router so that a backup module does not establish a
backup connection with an unauthenticated peer?
A. Set the backup call mode so that the module cannot answer calls until the primary connection goes
down.
B. Configure PAP or CHAP on the backup interface.
C. Add an authentication, authorization, and accounting (AAA) list to the backup interface.
D. Add authenticated routers' hostnames to the global configuration mode database.
Answer: B
HP HP0-144 HP0-144 prüfungsunterlagen
NO.11 What is a disadvantage of dynamic routing?
A. Dynamic routing does not allow you to restrict which networks are included in routing tables.
B. Dynamic routing can consume bandwidth and CPU processes on the router.
C. Dynamic routing is less scalable than static routing.
D. Dynamic routing makes adding new networks to a WAN difficult.
Answer: B
HP originale fragen HP0-144 HP0-144 echte fragen HP0-144
NO.12 Which interfaces can be configured as DHCP clients? Select TWO.
A. BRI interface
B. ADSL interface
C. ATM subinterface
D. Ethernet interface
E. Frame Relay interface
F. DSX-1 or G. 703 interface
Answer: CD
HP HP0-144 HP0-144 originale fragen HP0-144 antworten HP0-144
NO.13 Which command allows you to use enable mode commands from any mode except basic mode?
A. the get command
B. the go command
C. the nomode command
D. the do command
Answer: D
HP HP0-144 HP0-144 HP0-144
NO.14 How many access control lists (ACLs) can you apply directly to one interface?
A. 1
B. 2
C. 5
D. unlimited number
Answer: B
HP testantworten HP0-144 HP0-144 originale fragen HP0-144 zertifizierungsantworten
NO.15 Before the ProCurve Secure Router and the DSL Access Multiplexer (DSLAM) exchange
Asynchronous Transfer Mode (ATM) cells, they utilize physical-layer signaling to establish an Asymmetric
DSL (ADSL) connection. Which monitor evaluates the signal-to-noise ratio (SNR) margin while the router
and the DSLAM establish the physical ADSL connection?
A. ADSL monitor
B. showtime monitor
C. phase 1 monitor
D. training monitor
Answer: D
HP prüfungsfragen HP0-144 HP0-144 HP0-144 zertifizierungsantworten
NO.16 You have configured an Integrated Services Digital Network (ISDN) backup for your organization's
Frame Relay connection. When this connection goes down, which virtual interface could establish and
maintain the backup connection?
A. a backup Asynchronous Transfer Mode (ATM) interface
B. a backup Frame Relay interface
C. a backup Point-to-Point Protocol (PPP) interface
D. a backup BRI ISDN interface
Answer: C
HP prüfungsunterlagen HP0-144 dumps HP0-144 echte fragen
NO.17 What determines the number of Asynchronous Transfer Mode (ATM) subinterfaces you configure for
an Asymmetric Digital Subscriber Line (ADSL) connection?
A. the number of LANs you want to connect to the Internet
B. the number of access control lists (ACLs) you want to apply to the ADSL interface
C. the amount of bandwidth you want to reserve for upstream and downstream transmissions
D. the number of virtual circuits you want to establish
Answer: D
HP echte fragen HP0-144 HP0-144 zertifizierungsantworten HP0-144
NO.18 Which type of firewall monitors traffic on several layers of the Open Systems Interconnection (OSI)
model?
A. packet-filtering firewall
B. circuit-level gateway
C. application-level gateway
D. stateful-inspection firewall
Answer: D
HP HP0-144 HP0-144 HP0-144 HP0-144 echte fragen
NO.19 Which feature does the ProCurve Secure Router 7203dl provide that the ProCurve Secure Router
7102dl does not?
A. built-in encryption module
B. support for redundant power source (RPS)
C. one additional Ethernet port
D. support for up to 6 ADSL lines
Answer: B
HP HP0-144 HP0-144 zertifizierung HP0-144
NO.20 The status of the BRI interface is "connected." What does a connected status indicate?
A. The backup module is installed in the ProCurve Secure Router and is ready to be configured.
B. The BRI interface has been assigned to a primary connection.
C. The BRI interface is ready to provide a backup connection.
D. The BRI interface is currently providing a backup connection.
Answer: D
HP zertifizierungsfragen HP0-144 exam fragen HP0-144 testantworten HP0-144 echte fragen HP0-144
Pass4Test bietet Ihnen die neusten 00M-654 exam Unterlagen und CAT-440 pdf Fragen & Antworten mit hoher Qualität. Unser 000-588 zertifizierung und MB6-871 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative HP0-S33 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/HP0-144.html
没有评论:
发表评论